Home

About us

Products

Services

Achievements

Contact

Energy Division – Wholesaler of renewable energy equipment
Tel: 514-333-6414 Customer login | Français
 
Browse by category
MidNite Solar logo

Midnite Solar Shunt 500A 50mV DC current, brass with insulated base

Midnite Solar Shunt 500A 50mV DC current, brass wi
Questions about this product? Contact us:
*
*
*
*
*
A shunt is necessary in order to measure amps and amp-hours with a battery monitor. A shunt is an accurate, very low resistance resistor which is placed "in line" with the wire carrying the current to be measured. It is usually placed in the negative wire from the battery bank, such that all the current going into the battery (charging) or out (discharging) must pass through it.

The 100A model is scaled to read 1 mV per amp, while the 500A model reads 0.1 mV per amp. Brass with insulated base.
MaterialBrass
Width [cm]8.3800000000000008
Height [cm]4.57
Depth [cm]4.57
Weight [kg].45