Home

About us

Products

Services

Achievements

Contact

Energy Division – Wholesaler of renewable energy equipment
Tel: 514-333-6414 Customer login | Français
 
Browse by category
Magnum Energy logo

Pure sine wave inverter/charger, Magnum Energy, 2000W, 12V, 120V, 100A

Pure sine wave inverter/charger, Magnum Energy, 20Pure sine wave inverter/charger, Magnum Energy, 20
Questions about this product? Contact us:
*
*
*
*
*
MS Serie

The MS Series Inverter/Charger from Magnum Energy - a pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

A PFC (Power Factored Charger) charger is built into all Magnum inverter chargers. It uses less energy from a generator than a standard charger - using 25-30% less AC current than standard chargers.

This unit is ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and also meet KKK-A-1822E standards for emergency vehicle use.

Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

Features

  • The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%
  • The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you
  • Mount the MS Series on a shelf, bulkhead, or even upside down
  • The lightweight aluminum base and cover also provides noise reduction and corrosion resistance
  • The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port
  • The extra large AC access cover with terminal screw block and 360º DC connection terminals with covers make this inverter more accessible when it needs to be
  • The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator
  • 60 Amp transfer service is available on all models
  • Backed by a three year (36 month) limited warranty, and a five year limited warranty when installed on an MMP or MP system
TypeInverter/Charger Pure Sine
Battery voltage [V]12
Nominal Power [W]2000
Output voltage [V]120
Charger capacity [A]100
Efficiency [%]90.6
Maximum Units in Parallel1
Terminal Block Size [AWG]LUG
Terminal Block Temp Rating [C]90
Ambient temperature [C]-20 to +60
CertificationsUL/cUL 458, KKK-A-1822E
Width [cm]32.1
Height [cm]20.3
Depth [cm]34.9
Weight [kg]19.1
Warranty [years]3
Note (1)Warranty 5 years when installed on MMP or MP